You start driving, the blue route line is perfect on screen, and then… silence. No “in 500 metres, turn right.” You keep glancing down at the phone, which is exactly what voice directions are meant to stop you doing. If Google Maps voice navigation is not working on your Android phone, the map itself is rarely broken — the voice is usually muted in one place you have not checked yet, sent to the wrong speaker, or still waiting to download.

Quick Answer
Start a route, then tap the speaker icon on the navigation screen and choose Sound — not Alerts and not Mute. While Maps is speaking, press Volume Up, and in Maps Settings > Navigation set Guidance volume to Louder. If the voice plays on the phone but not through the car, turn on Play voice over Bluetooth and set the car stereo to Bluetooth. That sequence clears the silent-directions problem for most drivers.
In This Guide
Work through these in order. The first two fixes take under a minute and solve the majority of cases, because Maps has its own sound switch that is separate from your phone’s ringtone volume. Later fixes cover the car-audio trap and the less obvious download problem, where you hear a chime instead of words.
1. Set the navigation sound button to Sound
During navigation, Maps shows a speaker icon near the top of the screen. It has three states, and only one of them gives you full spoken directions. Many drivers tap it by accident, or set it once months ago and forget it exists.
- Open Google Maps and start navigation to any destination — you need an active route to see this control.
- Look for the speaker icon on the navigation screen and tap it.
- Choose Sound (the plain speaker with sound waves). Do not choose Alerts only and do not choose Mute.
- Drive a short distance, or let the next turn arrive, and listen for a spoken instruction.
Alerts only is the sneaky one. It still plays traffic warnings and incident alerts, so the phone is not completely quiet — which makes you think sound is working when spoken turn-by-turn directions are actually switched off. If you hear alerts but no “turn left” instructions, this setting is almost certainly the cause. The sound button works independently of the settings menu, so check it on the navigation screen itself even if you have already looked in Settings.
2. Turn up the media volume and the guidance volume
Your phone can ring loudly while Maps whispers. That happens because spoken directions use the media volume, not the ringtone volume, and Maps adds a second volume control of its own on top of that. Both need to be up.

- While navigation is running, press the Volume Up button. Ideally do this at the moment Maps speaks, or right after a direction, so you are adjusting the media slider rather than the ringtone slider.
- Go back to the Maps home screen, tap your profile picture, then Settings > Navigation.
- Under Guidance volume, choose Louder.
- If your phone has a Play test sound option on the same screen, tap it to check the output immediately.
Also check Do Not Disturb. On some phones it silences media playback from navigation even when the ringtone setting looks fine. Swipe down for Quick Settings and turn Do Not Disturb off for the drive, then test again. If the voice is faint rather than absent — audible in a quiet street, lost on a motorway — this fix alone usually settles it.
3. Route the voice to the right speaker — phone or car
This is the fix people miss when “it works at home but not in the car.” The voice is playing — just through a speaker you are not listening to. A Bluetooth headset in a bag, a car stereo on the radio source, or a Maps setting pointing at the wrong output all produce the same symptom: a silent dashboard and a phone that seems dead.
- In Maps, tap your profile picture, then Settings > Navigation.
- Find Play voice over Bluetooth. Turn it on if you want directions through the car speakers or a Bluetooth headset; turn it off if you want them from the phone speaker.
- On the car stereo, set the audio source to Bluetooth (not radio, not USB) when the toggle is on.
- If a headset or earbuds are connected and you do not want them, disconnect them and test again.
On Samsung phones (One UI), also pull down Quick Settings and check the media output picker — the small button on the media tile — to confirm the sound is going to the device you expect. On Pixel and Xiaomi (HyperOS) phones the same check lives in the volume panel: tap the three dots or the output icon while media is playing. If the voice jumps between speakers mid-route, re-pair the car Bluetooth connection once: forget the car in Bluetooth settings, pair again, and re-check the toggle above.
4. Let voice directions download, then update Maps
If you hear a short chime where a spoken direction should be, Maps is telling you something specific: the voice data has not finished downloading, or it needs an update. The map still works, the route still works — only the spoken words are missing, replaced by that ding.
- Connect to Wi-Fi or a stable mobile data connection and keep Google Maps open for a few minutes. Voice directions download while the app is open.
- Do not force-stop Maps during this wait — closing it pauses the download.
- Once the download completes, start a route again. You should hear words instead of chimes.
- If the problem persists, open the Play Store, search for Google Maps, and install any available update, then test a short route.
This download issue often appears after reinstalling Maps, clearing its data, or switching phones, because the voice pack has to come down again. It can also appear in areas with weak signal if you start navigation before the download finishes. Give it a few minutes on a good connection before moving to the last fix — a chime is good news in disguise, because it means audio output itself is fine.
5. Clear the Maps cache and restart if it is still silent
When every setting above is correct and the voice is still missing, a stuck Maps process or damaged temporary data is the remaining suspect. Clearing the cache removes that temporary data without deleting your saved places or settings.

- Go to Settings > Apps > Maps > Storage & cache.
- Tap Clear cache. Do not tap Clear data at this stage — that would sign you out and remove offline maps.
- Restart the phone, then start a fresh route and check the speaker icon once more.
- If the voice returns and thendisappears again on the next drive, repeat the sound-button check first — a setting that keeps resetting usually points to a Bluetooth device re-applying its own audio profile.
If none of these five fixes restore the voice, check whether the same silence happens with the phone speaker alone, with no car or headset connected at all. That single test splits the problem in half: silent everywhere points to Maps itself and is worth one reinstall; silent only in the car points back to the car’s Bluetooth source and pairing, not the phone. Covers Android 10 through 14.
Prefer a walkthrough? This video covers fixing Google Maps voice navigation on Android step by step:
Video by YourSixStudios
Related Guides
Frequently Asked Questions
Why does Google Maps only play alerts and not voice directions?
That means the navigation sound button is set to Alerts only. During an active route, tap the speaker icon and switch it to Sound. Alerts include traffic and incident warnings, but spoken turn-by-turn directions only play in Sound mode.
Why do I hear a chime instead of spoken directions in Google Maps?
A chime usually means the voice directions have not finished downloading yet. Keep Maps open on a stable internet connection for a few minutes, then start a route again. Updating Maps from the Play Store also helps if the voice pack is out of date.
Why does Google Maps voice work on my phone speaker but not in my car?
Check two things together: in Maps Settings > Navigation, Play voice over Bluetooth must be on, and the car stereo itself must be set to the Bluetooth source. If either one is wrong, the voice goes to the other speaker and the car stays silent.
By Sameer Zehri | App Fix Guru Editor | Last updated: November 2026